Longitudinal Seam Welding Unit Model OL
1.
– Central control panel with digital display for welding speed and welding length.
– Presetting is possible.
– Linearfahrwerk für Brenneraufnahme, max. Belastung 50 kg.
– Adjustable sensor – switch for start and stop position.
3.
– Copper chuck jaws are pressed pneumatically via pressure hose.
– Clamping force of copper chuck jaws 150N/cm at 3 bar pre-pressure.
– Chuck jaws are adjustable via adjusting screws from 5-25 mm to the middle of the welding seam.
4.- Lower beam equipped with a copper bearing ra
il. [lb]
– Prepared for water cooling and bottom formation.
– Turnbuckle for locking the lower beam is equipped with a safety switch.
– Chuck jaws are adjustable via adjusting screws from 5-25 mm to the middle of the welding seam.
Adjustable height of lower beam according to material thickness.
– Manually adjustable torch mounting on X-Y-Z axis.
– Pivotable torch axis up to max. 60°.
– Enough space for the inclusion of a cold wire feeder.
Model | OL-04 | OL-06 | OL-08 | OL-10 | OL-12 |
|---|---|---|---|---|---|
Supply Voltage | V1: AC 230V/60Hz V2: AC 400V/50Hz | V1: AC 230V/60Hz V2: AC 400V/50Hz | V1: AC 230V/60Hz V2: AC 400V/50Hz | V1: AC 230V/60Hz V2: AC 400V/50Hz | V1: AC 230V/60Hz V2: AC 400V/50Hz |
Min. workpiece length | 460 mm | 660 mm | 860 mm | 1060 mm | 1260 mm |
Workpiece diameter | 65 – 600 mm | 90 – 780 mm | 110 – 780 mm | 145 – 780 mm | 160 – 780 mm |
Wall thickness | 0,6 – 6,0 mm | 0,6 – 6,0 mm | 0,6 – 6,0 mm | 0,6 – 10,0 mm | 0,6 – 10,0 mm |
Lower beam | turnbuckle for locking | ||||
Torch movement | ballscrew and linear slide | ||||
Torch speed | 100 − 1500 mm/min | ||||
Clamping | pneumatically via pressure hose | ||||
Gas | automatic control | ||||
Cooling | water circulation | ||||
Middle stop collar | pneumatically | ||||
Arc type | Standard/crater | ||||
Timer | 0 − 9,9 sec | ||||
Start Arc | 0 − 9,9 sec | ||||
Crater filling | 0 − 9,9 sec | ||||
Length adjustment | 2 sensor switches (start position sensor + stop position sensor) | ||||
HF-protection | 96 % | ||||
Item number | 02.32.20.01400 (old: 71080304) | 02.32.20.01600 (old: 71080306) | 02.32.20.01800 (old: 71080308) | 02.32.20.01100 (old: 71080310) | 02.32.20.01200 (old: 71080312) |
Model | OL-15 | OL-18 | OL-20 | OL-25 | OL-30 |
|---|---|---|---|---|---|
Supply Voltage | V1: AC 230V/60Hz V2: AC 400V/50Hz | V1: AC 230V/60Hz V2: AC 400V/50Hz | V1: AC 230V/60Hz V2: AC 400V/50Hz | V1: AC 230V/60Hz V2: AC 400V/50Hz | V1: AC 230V/60Hz V2: AC 400V/50Hz |
Min. workpiece length | 1560 mm | 1860 mm | 2060 mm | 2560 mm | 3060 mm |
Workpiece diameter | 200 – 1000 mm | 230 – 1000 mm | 250 – 1000 mm | 300- 1000 mm | 350 – 1000 mm |
Wall thickness | 0,6 − 10,0 mm | 1,0 − 12,0 mm | 1,0 − 12,0 mm | 1,0 − 12,0 mm | 1,0 − 12,0 mm |
Lower beam | turnbuckle for locking | ||||
Torch movement | ballscrew and linear slide | ballscrew and linear slide | |||
Torch speed | 100 − 1500 mm/min | ||||
Clamping | pneumatically via pressure hose | ||||
Gas | automatic control | ||||
Cooling | water circulation | ||||
Middle stop collar | pneumatically | ||||
Arc type | pneumatically | ||||
Timer | 0 − 9,9 sec | ||||
Start Arc | 0 − 9,9 sec | ||||
Crater filling | 0 − 9,9 sec | ||||
Length adjustment | 2 sensor switches (start position sensor + stop position sensor) | ||||
HF-protection | 96 % | ||||
Item number | 02.32.20.01500 (old: 71080315) | 02.32.20.01800 71080318 | 02.32.20.02000 (old: 71080320) | 02.32.20.02500 (old: 71080325) | 02.32.20.03000 (old: 71080330) |
Data sheet
