POS-750MA/AC/ACR/ACS
Positioners, medium-weight
POS-750 A / AS / AC / ACS / ACR / ACR S
Features:
– Table can be tilted motor-driven from 0° to 135°
– Foot switch start/stop.
– Rotating direction adjustable: cw/ccw.
– 60 mm hollow shaft.
– Table diameter: 600 mm.
– Table speed adjustable from 0,12 − 1,2 or from 0,05 − 5 rpm.
– Welding machine can be actuated via turntable control.
– Mass contact transmits 400 A /100 %.
– Control with overlap welding
– HF-protected.
Scope of delivery:
– Control unit (integrated)
– Start/stop foot switch
– Cable remote control
A = motor-driven tilting
AS = motor-driven tilting with servo motor
AC = motor-driven tilting with overlap welding
ACS = motor-driven tilting with overlap welding and servo motor
ACR = motor-driven tilting with overlap welding and robotic interface
ACR S = motor-driven tilting with overlap welding, robotic interface and servo motor
Model | POS 750 A / AS / AC / ACS / ACR / ACR S | |
|---|---|---|
Supply Voltage | AC 400 V/50 Hz | |
Ground connection | 400A/100% | |
Tilting range | 0° to 135° | |
Turntable diameter | 600 mm | |
Hollow shaft | 60 mm | |
Mounting hole circle Ø | 190 mm to max. 540 mm | |
Slot width table | 17 mm | |
RPM standard optional: Servo-Motor |
A: 0,12 to 1,2 u/min B: 0,05 – 5 u/min | |
rotation torque | 675 Nm | |
tilt torque | 1500 Nm | |
Max. Load A | 750 kg | |
Rotating direction | cw/ccw | |
Remote control | RPM & rotating dir. adjustable | |
Measur. (L x W x H) mm | ca. 704 x 650 x 585 | |
Weight | ca. 334 kg | |
Item no. POS-750 A | 02.30.01.10710 | |
Item no. POS-750 AS | 02.30.01.10780 | |
Item no. POS-750 AC | 02.30.01.10720 | |
Item no. POS-750 ACS | 02.30.01.10730 | |
Item no. POS-750 ACR | 02.30.01.10740 | |
Item no. POS-750 ACR S | 02.30.01.10785 | |
Data sheet
