POS-1 TA / TAC / TACR / TAS / TACS
Positioners, medium-weight POS-1TA / TAC / TACR / TAS / TACS
Perfectly positioned
When choosing a turntable,
the turning and tilting moment must be considered For
the mounting of eccentric workpieces we recommend
to use counterweights.
TA = motor-driven tilting
TAC = motor-driven tilting with overlap welding
TACR = motor-driven tilting with overlap welding and robotic interface
TAS = motor-driven tilting with servo motor
TACS = motor-driven tilting with overlap welding and servo motor
Model | POS-1 TA / TAC / TACR / TAS /TACS | |
|---|---|---|
Supply Voltage | AC 400V/18A/50Hz | |
Ground connection | 1000 A/100 % | |
Tilting range | 0° to 135° | |
Turntable diameter | 900 mm | |
Hollow shaft | 120 mm | |
Mounting hole circle Ø | 260 mm to max. 750 mm | |
RPM standard optional: Servo-Motor | 0,05 to 0,5 u/min 0,05 – 5 u/min | |
rotation torque | 3000 Nm | |
tilt torque | 4500 Nm | |
Max. vertical load | 1000 kg | |
Rotating direction | cw/ccw | |
Remote control | RPM & rotating dir. adjustable | |
Measur. (L x W x H) mm | 1050 x 935 x 801 | |
Weight | 750 kg | |
Item no.POS-1 TA | 02.30.02.11010 | |
Item no. POS-1 TAC | 02.30.02.11020 | |
Item no. POS-1 TACR | 02.30.02.11030 | |
Item no. POS-1 TAS | 02.30.02.11040 | |
Item no. POS-TACS | 02.30.02.11045 | |
Data sheet
