Longitudinal Seam Welding Unit Model OL
Longitudinal Seam Welding Unit Model OL with SPS
The OL is a longitudinal welding bench for welding sheet metal and pipes.
Now also available with PLC control and centre stop. The central control panel with digital display allows presetting of welding speed and welding length.
Which model you choose depends on your weld seam length..
Because the Ol models are available for workpiece lengths from 460mm to 3060mm, or for workpiece diameters from 65mm to 1000mm.
1.
– Central control panel with digital display for welding speed and welding length.
– Presetting is possible.
– Linearfahrwerk für Brenneraufnahme, max. Belastung 50 kg.
– Adjustable sensor – switch for start and stop position.
3.
– Copper chuck jaws are pressed pneumatically via pressure hose.
– Clamping force of copper chuck jaws 150N/cm at 3 bar pre-pressure.
– Chuck jaws are adjustable via adjusting screws from 5-25 mm to the middle of the welding seam.
4.- Lower beam equipped with a copper bearing ra
il. [lb]
– Prepared for water cooling and bottom formation.
– Turnbuckle for locking the lower beam is equipped with a safety switch.
– Chuck jaws are adjustable via adjusting screws from 5-25 mm to the middle of the welding seam.
Adjustable height of lower beam according to material thickness.
– Manually adjustable torch mounting on X-Y-Z axis.
– Pivotable torch axis up to max. 60°.
– Enough space for the inclusion of a cold wire feeder.
Model | OL-04 | OL-06 | OL-08 | OL-10 | OL-12 |
|---|---|---|---|---|---|
Supply Voltage | V1: AC 230V/60Hz V2: AC 400V/50Hz | V1: AC 230V/60Hz V2: AC 400V/50Hz | V1: AC 230V/60Hz V2: AC 400V/50Hz | V1: AC 230V/60Hz V2: AC 400V/50Hz | V1: AC 230V/60Hz V2: AC 400V/50Hz |
Min. workpiece length | 460 mm | 660 mm | 860 mm | 1060 mm | 1260 mm |
Workpiece diameter | 65 – 600 mm | 90 – 780 mm | 110 – 780 mm | 145 – 780 mm | 160 – 780 mm |
Wall thickness | 0,6 – 6,0 mm | 0,6 – 6,0 mm | 0,6 – 6,0 mm | 0,6 – 10,0 mm | 0,6 – 10,0 mm |
Lower beam | turnbuckle for locking | ||||
Torch movement | ballscrew and linear slide | ||||
Torch speed | 100 − 1500 mm/min | ||||
Clamping | pneumatically via pressure hose | ||||
Gas | automatic control | ||||
Cooling | water circulation | ||||
Middle stop collar | pneumatically | ||||
Arc type | Standard/crater | ||||
Timer | 0 − 9,9 sec | ||||
Start Arc | 0 − 9,9 sec | ||||
Crater filling | 0 − 9,9 sec | ||||
Length adjustment | 2 sensor switches (start position sensor + stop position sensor) | ||||
HF-protection | 96 % | ||||
Item number | 02.32.20.01400 (old: 71080304) | 02.32.20.01600 (old: 71080306) | 02.32.20.01800 (old: 71080308) | 02.32.20.01100 (old: 71080310) | 02.32.20.01200 (old: 71080312) |
Model | OL-15 | OL-18 | OL-20 | OL-25 | OL-30 |
|---|---|---|---|---|---|
Supply Voltage | V1: AC 230V/60Hz V2: AC 400V/50Hz | V1: AC 230V/60Hz V2: AC 400V/50Hz | V1: AC 230V/60Hz V2: AC 400V/50Hz | V1: AC 230V/60Hz V2: AC 400V/50Hz | V1: AC 230V/60Hz V2: AC 400V/50Hz |
Min. workpiece length | 1560 mm | 1860 mm | 2060 mm | 2560 mm | 3060 mm |
Workpiece diameter | 200 – 1000 mm | 230 – 1000 mm | 250 – 1000 mm | 300- 1000 mm | 350 – 1000 mm |
Wall thickness | 0,6 − 10,0 mm | 1,0 − 12,0 mm | 1,0 − 12,0 mm | 1,0 − 12,0 mm | 1,0 − 12,0 mm |
Lower beam | turnbuckle for locking | ||||
Torch movement | ballscrew and linear slide | ballscrew and linear slide | |||
Torch speed | 100 − 1500 mm/min | ||||
Clamping | pneumatically via pressure hose | ||||
Gas | automatic control | ||||
Cooling | water circulation | ||||
Middle stop collar | pneumatically | ||||
Arc type | pneumatically | ||||
Timer | 0 − 9,9 sec | ||||
Start Arc | 0 − 9,9 sec | ||||
Crater filling | 0 − 9,9 sec | ||||
Length adjustment | 2 sensor switches (start position sensor + stop position sensor) | ||||
HF-protection | 96 % | ||||
Item number | 02.32.20.01500 (old: 71080315) | 02.32.20.01800 71080318 | 02.32.20.02000 (old: 71080320) | 02.32.20.02500 (old: 71080325) | 02.32.20.03000 (old: 71080330) |
Data sheet
