POS-300M/MC/MCR/A/AC/ACR
Positioners, medium-weight POS-300M/MC/MCR/A/AC/ACR
Perfectly positioned
When choosing a turntable, the turning and tilting moment must be considered. For the mounting of eccentric workpieces we recommend to use counterweights. This protects the bearings and increases the service life of the turntable.
Features:
– Table can be tilted motor-driven from 0° to 135°
– Foot switch start/stop.
– Rotating direction adjustable: cw/ccw.
– 60 mm hollow shaft.
– Table diameter: 450 mm.
– Table speed adjustable from 0,26 − 2,6 or 0,05 − 5 rpm.
– Welding machine can be actuated via turntable control.
– Mass contact transmits 400 A /100 %.
– Control with overlap welding
– HF-protected.
Scope of delivery:
– Control unit (integrated)
– Start/stop foot switch
– Cable remote control
M = manual tilting
MC = manual tilting with overlap
MCR = manual tilting with overlap welding and robotic interface
A = motor-driven tilting
AC = motor-driven tilting with overlap welding and robotic
ACR = motor-driven tilting with overlap welding and robotic interface interface
Model | POS 300M/MC/MCR/A/AC/ACR | |
|---|---|---|
Supply Voltage | 230 V, 50Hz | |
Ground connection | 300A/100% | |
Tilting range | 0° to 135° | |
Turntable diameter | 400 mm | |
Hollow shaft | 60 mm | |
Mounting hole circle Ø | 120 mm to max.. 356 mm | |
Slot width table | 17 mm | |
Rotating speed | 0,34 to 3,4 u/min | |
Max. Load | 300 kg | |
Table tilt | manually (by hand wheel) | |
Measur. (L x W x H) mm | ca. 340 x 288 x 410 | |
Weight | ca. 150 kg | |
Item no.POS-300M | 01.30.01.10310 | |
Item no.POS-300MC | 01.30.01.10320 | |
Item no. POS-300MCR | 01.30.01.10330 | |
Item no. POS-300A | 01.30.01.10340 | |
Item no. POS-300AC | 01.30.01.10350 | |
Item no.POS-300ACR | 01.30.01.10360 | |
Data sheet
