With electric push-button ST
With electric push-button ST
The electric JAVAC sensor scans the form of the welding seam with a sensor. The scan is effected in two directions. Geometrical irregularities will be detected at once. They will be calculated by the control system and the torch as well as the workpiece will be repositioned timely. The complete communication system can be connected with a welding device. This ensures a very high welding quality. It is suitable for overlap welding, fillet welding as well as butt weldings with groove or joint. The complete communication system can be connected with a welding device. This ensures a very high welding quality. It is suitable for overlap welding, fillet welding as well as butt weldings with groove or joint.
The JAVAC seamtracking system comprises a control box, a 2D sensor, a sensor holder, an electric precision cross support, a clamp holder and different “scanners”. The sensor is completely coated and thus prevents from damage caused by welding dust, heat and humidity inside the system.
Model | JC-ST05 | JC-ST10 | JC-ST20 |
---|---|---|---|
Supply Voltage | AC 230 V, 50/60 Hz | AC 230 V, 50/60 Hz | AC 230 V, 50/60 Hz |
Load | 25 kg | 50 kg | 100 kg |
Tracking range | 100 mm | 200 mm | 200 mm |
Tracking speed | 20 to 250 mm/min | 20 to 250 mm/min | 20 to 200 mm/min |
Support precision | +- 0,25 mm, optional +- 0,13 mm | ||
Weld mode | MIG, WIG, CO2 | UP | UP |
Temperature | -10° to +70° | ||
Control function | Up/down and cw/ccw-movement, emergency stop, movement limit, track detection, limit detection, adjustment of track speed, remote control |
Data sheet