Seamtracking with electronic sensor ST

The Javac welding seamtracker scans the shape of the welding seam with a sensor. The scan is effected in two directions. Geometrical irregularities will be detected at once. They will be calculated by the controller and the torch as well as the work piece will be positioned in time. The complete communication system can be connected with a welding unit. This ensures a very high welding quality. It is suitable for overlap welding, fillet welding as well as butt weldings with groove or joint.

 

The JAVAC welding seamtracker comprises a control box, a 2D sensor, a sensor holder, an electric precision cross slide, a clamp holder and different sensing devices. The sensor is completely coated which effectively prevents from damage to inner components caused by welding dust, heat and moisture.

 

ModelJC-ST05JC-ST10JC-ST20
Supply voltage AC 230 V, 50/60 Hz AC 230 V, 50/60 Hz AC 230 V, 50/60 Hz
Max. load 25 kg 50 kg 100 kg
Tracking range 100 mm 200 mm 200 mm
Tracking speed 20 to 250 mm/min. 20 to 250 mm/min. 20 bis 200 mm/min
Support precision +- 25 mm, optional +- 0,13 mm
Welding MIG, TIG, CO2 UP UP
Temperature -10° to +70°
Control functions up/down and left/right movement, emergency stop, stroke range, track detection, limit detection, track speed, remote control

Greising