Lightweight design Welding Mast HC-Series
Features:
- Welding mast for MIG/MAG and SAW single wire welding respectively
- For longitudinal and circumferential welding
- Robust and consistent
- The system is equipped with drop protection and is shock mounted
- Boom extension through infinitely variable speed regulation (inverter); speed is displayed digitally
- Column rotation and carriage movement through infinitely variable speed regulation (inverter) from HC3030 upwards;
the speeds are displayed digitally.
- Resonating base plate offers enough place for the power source.
- Existing interface for connection with roller block and positioner for synchronization.
- Limit switch for lifting, turning and boom.
- Protection against overload, overcurrent, undervoltage and short circuit.
- Rail with tilt protection for the complete manipulator in wheeled design.
| Model | HC-2020 | HC-3030 | HC-4040 | HC-5050 |
| Effective horizontal extension |
2000 mm |
3000 mm |
4000 mm |
5000 mm |
| Effective vertical lifting |
2000 mm |
3000 mm |
4000 mm |
5000 mm |
| Boom extension speed |
120 - 1200 mm/min. |
| Boom lifting speed |
400 mm/min. |
1000 mm/min. |
| Angle of tilt |
+- 180° |
+- 180° |
+- 180° |
+- 180° |
| Rotating speed (rpm) |
manually |
0,05 - 0,5 |
0,05 - 0,5 |
0,05 - 0,5 |
| Trolly travel speed mm/min |
manually |
200 - 2000 |
200 - 2000 |
200 - 2000 |
| Support (mm) |
100 x 100 manual |
150 x 150 electrical |
150 x 150 electrical |
150 x 150
electrical |
| Max. load boom end |
100 kg |
300 kg |
200 kg |
100 kg |
| Max. boom length |
2715 mm |
3420 mm |
5210 mm |
6210 mm |
| Min. mast height (fixed) |
448 mm |
670 mm |
670 mm |
710 mm |
| Min. mast height (moveable) |
468 mm |
780 mm |
780 mm |
800 mm |
| Total height (fixed) |
3120 mm |
4830 mm |
5830 mm |
6870 mm |
| Total height (moveable) |
3140 mm |
4940 mm |
5940 mm |
6960 mm |